Fully Automatic Horizontal Paper Baler with High Strength Steel Frame and 50-200 Tons Pressing Force

Important Reminder: Please read this complete user instruction carefully before operating the fully‑automatic horizontal hydraulic baler. Only fully‑trained and authorized operators are allowed to run this industrial recycling equipment. Improper operations will lead to personal injury, equipment damage and invalidation of machine warranty. All warning labels attached on the machine must not be removed or covered. This baler is designed to compress recyclable loose materials such as OCC cardboard, waste paper, PET plastic bottles, plastic film, woven bags and textile scraps. Do not process metal blocks, stones, rubber blocks and other ultra‑hard foreign substances.

General Safety Precautions

Safety is the top priority for daily production. Please strictly comply with all safety regulations during the whole working cycle.

1. Never remove, short‑circuit or disable any safety‑protection devices including emergency‑stop buttons, safety light curtain, safety interlock switches and hydraulic overload protection assemblies. Any modification on safety components will bring huge hidden dangers for operators and the whole production line.
2. While the machine is powered‑on or running, do not put hands, arms or any body parts into feeding hopper, compression chamber and automatic wire‑tying working zone. Even in low‑speed status, moving hydraulic cylinders and mechanical structures may cause serious injury.
3. Before carrying out any cleaning, inspection, lubrication, repair or component replacement work, you must cut off the main power supply completely, lock the power switch, and release residual pressure inside the hydraulic system. Do not perform maintenance when the machine is in energized condition.
4. Electrical cabinet, motor and all electrical components must be kept dry all the time. Never rinse electric parts directly with water or high‑pressure water gun. Prevent rain, moisture and dust from entering inside the control cabinet.
5. Operate within the permitted ambient temperature range of ‑10℃ ~ +45℃. Do not overload the baler beyond its rated pressing force, hourly throughput and motor power parameters.
6. Operators are suggested to wear anti‑slip working shoes and protective gloves. Loose‑fit clothes, scarves and long hair should be well restrained to avoid being caught by conveyor belts or transmission mechanisms.